qualification

ASC is an ISO9001 / AS9100 certified company based in Wichita, Kansas, specializing in the design, qualification, and manufacturing of complex pneumatic components for the aerospace, defense, and marine industries. It offers a one-stop shop from concept through design, prototype build, qualification, and production, with a portfolio of over 500 products and custom engineering solutions.

custom designdesignengineeringmanufacturingPrototype BuildTesting to RTCA DO-160 standards

Alkemix Corporation provides advanced materials solutions to the ablative and composite manufacturing community. Its charter is obsolescence avoidance; it partners, validates, qualifies, and distributes existing products while developing low-cost ablative alternatives to combat and prevent sole-sourced supply risk.

distributionproduct development supportvalidation

Altum RF designs, manufactures, and delivers high-performance RF to millimeter-wave components for advanced electronics systems. Founded in 2019 by industry experts, the company specializes in design, modeling and packaging of microwave and millimeter-wave ICs from DC to 150 GHz, using GaAs and GaN technologies. It serves SatCom, telecom/5G/6G, test & measurement, aerospace & defense, and ISM markets.

2D and 3D EM simulationfull supply chain managementMMIC designpackagingproduction testtape-outtransistor modeling

Antec Scientific is a supplier of electrochemistry-based analytical instruments for HPLC and MS, active since 1990. Products include the DECADE Elite electrochemical detectors, ROXY reactors for EC-MS, SweetSep columns, and ALEXYS analyzers such as the Carbohydrate, Neurotransmitter, Clinical, and Antibiotics Analyzers. The company also provides services including training, maintenance, installations, qualification, and repair.

electrochemistry with MS detectionHPAEC-PADHPLC with electrochemical detectioninstallationsmaintenancepulsed amperometric detectionrepairtraining

ASIC North is a U.S.-based ASIC design services company providing comprehensive Very Large Scale Integration (VLSI) development, verification, fabrication, characterization, qualification and supply services to the semiconductor industry. It offers custom and semi-custom ASIC and VLSI chip design services, IP core development, and turnkey design solutions, serving markets including semiconductor, aerospace & defense, IoT, commercial, consumer electronics, industrial and agricultural.

analog circuit designDigital ASIC DesignDigital VerificationfabricationIC Mask DesignIP developmentlab characterizationMixed-Signal VerificationRF designSupply Chain ManagementVLSI Design Staffing

Axillon Aerospace engineers and manufactures composite aerospace components, including composite structures, engine composites, high-performance radomes, next-gen antennas, and electro-thermal ice protection systems. The company operates facilities in Saltillo, San Diego, Erlanger, Rockmart, and Baltimore, serving commercial and defense aerospace programs. It was formed in 2024 when SK Capital acquired the former Composites and Fuel Containment Division of Parker Hannifin.

acceptance testingautoclave curingcomponent assemblycomposite prepreg layupdesignfabricationfinal inspectionGerber cuttingin-house paintingmachiningmoldingmulti axis compression moldingPressingwet and dry lay-up

Bryka Inc is an ITAR-compliant, woman-owned small business that has been designing, developing, integrating, and assembling semiconductors for space operations since 1980. It specializes in Mixed-Signal and Radiation-Hardened ASICs and System-on-a-Chip solutions for space applications, serving semiconductor, defense, and aerospace clients.

Boule Formationburn-in testingcircuit designcuringdecapsulationDie Attachmentengineering & designfunctional analysisIntegrated Circuit DesignLead FormationPackage AssemblyReliabilityreverse engineeringscanning electron microscopySystem-On-Chip Designwafer fabricationWafer Testingwire bonding

cGMP Validation was established in 1997 as a full service validation/compliance firm serving the pharmaceutical, bulk pharmaceutical, animal health, biotechnology, biologics, medical device and medical diagnostic industries. It specializes in preparation and execution of validation IQ/OQ/PQ protocols and compliance documentation for equipment, utilities, processes, laboratory instruments, and computer systems, with clients across the US, Puerto Rico, Canada and internationally.

21 CFR Part 11Auditingcommissioningcompliance consultingComputer System Validationdocument preparationfactory acceptance testingrisk assessmentsite acceptance testingtrainingvalidation

C-K2 is a joint venture specializing in U.S. government contracting, described as a Native Hawaiian Organization (NHO)-owned 8(a) entity. It is a partnership between K2 and Global Technology & Management Resources (GTMR), a wholly owned subsidiary of Castellum. The company delivers engineering services, interactive technologies, logistics support, disaster response, workforce development, and defense and mission-critical support.

AI-driven analyticsdata acquisitionembedded systemsemergency responseenterprise IT modernizationfabricationglobal security operationshazardous materials handlingIETM developmentinventory and material managementoperational test and evaluationproject managementsecure cloud solutionsSIGINT equipment integrationsoftware engineeringsystem designtalent acquisitionTechnical Writingtraining and professional development

Dalembert Consulting Inc. is a Canadian defense engineering firm registered under the Controlled Goods Program, managed by Public Services and Procurement Canada. Its engineers come from the defense industry with substantial knowledge in medium and large caliber weapon systems and their ammunition, applying that knowledge in design, simulation, manufacturing, testing, qualification and investigation of these complex systems. The firm provides technical guidance and support to the armed forces and defense industry for decision-making regarding weapon syst

ballistic test equipment designFinite Element Analysis (FEA) in dynamic regimeinternal ballistic simulationmanufacturingproject managementsimulationtechnical investigationterminal effects simulationtestingtrainingweapon system designweapon system integration

Dynamic Sealing Technologies (DSTI) specializes in the design and manufacturing of application-specific fluid solutions worldwide. Its engineered fluid sealing products transfer hydraulic oil, chemicals, water, air, and other liquids and gases for rotating applications. DSTI offers custom integrated solutions and a full line of in-stock standard fluid and electrical products, including fluid rotary unions and electrical slip rings. It is a Kadant Company headquartered in Andover, MN, USA.

assemblybending, load, and pressure testingCNC machiningdesignmanufacturingtestingwelding

Ecliptic is a space avionics and sensor systems company founded in Pasadena, California in 2001, serving commercial, civil and defense markets. Its flagship RocketCam™ product family is an onboard video system for rockets and spacecraft, with over 150 mission successes. The company develops, manufactures and tests video systems, payload controllers and sequencers, layer 3 switches, and data management equipment for satellites, rockets and spacecraft.

designimage acquisition and processingmanufacturingproductiontest

ERZIA designs and manufactures high-performance RF and microwave systems for aerospace, defense, space, satcom, radar, telecommunications, and laboratory applications. Founded in 2002 and headquartered in Santander, Spain, with a regional office in Alexandria, Virginia, the company is ISO 9001:2015 and UNE-EN 9100:2018 certified and controls design, production, and delivery of its components and subsystems.

clean room manufacturingdesignmanufacturingproduction and test automationRF and microwave engineering

FIRST RF specializes in custom RF design and production of advanced antennas and RF systems, taking an engineering-first approach to create innovative antennas and RF systems. The company delivers full lifecycle solutions from concept to production, with 300,000 antennas delivered since 2005, serving airborne, vehicular, fixed-site, space, maritime, and man-portable applications.

AESA designantenna designbeamformingconformal antenna integrationmanufacturingoperational performance testingproductionprototypingRF designsimulation and analysisSustainment

Freeman Contracting and Consulting (FCC) is a veteran owned company established in 2013, managed by working consultants. FCC provides highly skilled consultants to support FDA regulated Life Cycle projects, using GAMP based strategic planning and onsite, remote, and hybrid schedules. It serves the life sciences industry with Commissioning, Qualification, and Validation (CQV) services for facilities, utilities, and equipment.

auditscommissioningcomplianceCost Optimization Consultingproject managementSEO optimizationStaff augmentationvalidationwebsite development

Freemelt develops advanced 3D printers for metal components using E-PBF (Electron Beam Powder Bed Fusion) technology. The company offers two business lines: Production Systems (E-PBF application development and aftermarket services) and Manufacturing (component design, process development, qualification, inspection and industrial delivery). It serves customers in MedTech, defense, fusion, energy and other advanced industrial verticals in Europe and the U.S. Freemelt was founded in 2017 and is listed on Nasdaq First North Growth Market.

additive manufacturingapplication developmentcomponent designElectron Beam Powder Bed Fusion (E-PBF)feasibility studiesindustrial deliveryinspectionmetal 3D printingprocess development

The advancement of propulsion is a cornerstone to the advancement of humans in space.-Jim Mc Kinnon, Founder and CEO Founded in 1997 by Jim Mc Kinnon and incorporated in 2014, Frontier Aerospace Corporation (formerly Frontier Engineering) emerged from Mc Kinnon's extensive experience at Pratt & Whitney Rocketdyne. Today, we specialize in the conceptualization, design, and additive manufacturing of innovative in-space and launch system rocket propulsion, transforming pioneering ideas into flight-ready reality. Driven To Be The Best Backed by AE Ventures investments for manufacturing and test infrastructure built to support high volume production, Frontier Aerospace develops innovative hypergolic engines and propulsion systems for commercial, civil, and national security space missions. We employ a proven rapid development approach that produces reliable, mission-optimized, and.

additive manufacturingconcept developmentdesignhot-fire validationmanufacturingproductiontesting

JEM Engineering is a supplier of antenna and antenna systems for military and commercial applications. The company develops unique antennas for commercial and military use, offers in-house rapid prototyping and testing services, and houses two RF test chambers at its facility in Laurel, Maryland. Its product line covers a spectrum from 2 MHz to 40 GHz, including HF, UHF, and VHF antennas for airborne platforms.

antenna design and developmentin-house testingmanufacturingmechanical designrapid prototypingRF testing