magnetic particle inspection

AAA Plating & Inspection, Inc. began business in 1958 and operates a 50,000 square foot facility in Compton, California, described as the largest vacuum coatings facility in the world. The company provides metal finishing, plating, Ion Vapor Deposition (IVD) and non-destructive testing services, and is most noted for serving the aerospace industry. It holds AS 9100 and Nadcap certifications for Chemical Processing and Non Destructive Testing.

anodizingcadmium platingconductivity testingFluorescent Dye Penetrant inspectionglass bead blastingIon Vapor Deposition (IVD)non-destructive testingpainting/coatingspassivationRockwell hardness testingsalt spray fog testingstress relieve up to 650Fvacuum cadmium coating

Aero Chrome Plating is a NADCAP and FAA/EASA-approved aerospace plating and metal finishing company with over 40 years of experience. It operates as an FAA/EASA Repair Station (FAA Repair Station #OWPR735L, EASA.145.6984) and specializes in chrome, nickel, and cadmium plating plus additional finishing services for aerospace, industrial manufacturing, and defense/military applications.

blastingcadmium platingchemical filmchrome platingelectro-polishLiquid Penetrant InspectionmachiningNDT inspectionnickel platingnital etchpassivationprecision grindingPrime & Paintstress relievestripping

Aero-Flex Corp. is a metal assembly and metal fabrication company founded in 2008 by Josh and Michael Deakter. It fabricates flexible metal hose assemblies, ASME rigid piping systems, tube assemblies, PTFE and rubber hoses, and precision machined parts, and offers specialty welding, high purity cleaning, and NDT services. The company is certified to AS9100D and ISO9001:2015 and serves the Gas Turbine, Oil & Gas, Chemical, Cryogenic, Subsea and Aerospace industries.

aerospace weldingASME piping fabricationCNC machiningCNC mandrel tube bendinghigh purity cleaningindustrial weldingmanual tube bendingNDTpassivation/picklingspecialty welding

Air Prop Specialists is an FAA-certified repair station (FAA #IX4R274M) founded in 1976 at Wheelless Airport in Dothan, Alabama, and now located at Marianna Municipal Airport (KMAI) in Marianna, Florida. It is a full-service propeller shop offering overhaul and repair of propellers and governors, with certified on-site technicians and an in-house machine shop.

AeroScan digital blade measurementeddy current inspectionemergency servicesFluorescent Dye Penetrant inspectiongovernor overhaul and repairIn-house machine shopNDT inspectionon-site servicepropeller overhaul and repair

Allblack Co., Inc. is a Whittier, California metal finishing company with 35 years of experience, averaging 50,000 pounds of finished product daily and often completing jobs within 24 hours. The company operates an aerospace quality system and offers chemical processing and nondestructive testing, with an in-house testing laboratory.

black oxidedeburringin-house testing laboratoryliquid penetrant testingmanganese phosphate coatingmechanical cleaning media blastingNadcap accreditationnondestructive testingpassivationtumblingzinc phosphate

American Testing Services is a non-destructive testing and metallurgical testing lab in Miamisburg, Ohio, operating since 2002. It is 100% employee-owned and serves aerospace, military, commercial manufacturing, construction, foundry, fabricating and amusement customers. The company offers NDT, metallurgical testing, NDT training, equipment calibration and Level III consulting, working in its lab or at customer sites.

bolt torquingcertified weld inspectionchemical testingcorrosion testingeddy current testingequipment calibrationfailure analysisLiquid Penetrant Inspectionmechanical testingmetallographyNDT trainingradiographyrope accessUltrasonic TestingVisual Inspectionweld testing

The ASKO Group provides metal plating and finishing services, including plating, painting, repairing, and reconditioning metal parts for aerospace, electronics, medical, and industrial applications. It operates as four divisions: ASKO Processing, ASKO Aviation Services, ASKO Selective Plating, and Color Tech. It is a veteran-owned small business and an FAA Certified Repair Station (#OKSR369L) with CAA UK Part-145 and EASA Part-145 approvals.

anodizingBlack Oxide coatingchemical filmdry film lubricantselectro chemical etchpenetrant inspectionplating

BTM Incorporated is a family-owned and operated precision machine shop established in 1988 in Jim Thorpe, Pennsylvania. It employs 30 people and supplies high-quality American-made machined parts to some of the world's largest manufacturers, specializing in the pump and valve, energy transfer, and Defense industries. BTM operates under a quality control system fully compliant with ISO 9001-2015.

assemblyCNC machiningconventional millingconventional turningdynamic and static balancinghydrostatic testinginspectionlive toolingmulti-axis machiningPositive Material Identificationquality controlwelding

Better Aviation Products, Inc. is an FAA Certified Repair Station formed in 1994, servicing the aviation industry. It holds JAA Approval (now EASA 5100) and is an Approved Vendor in major airlines' Quality Programs. The company overhauls and repairs items such as avionics, radar, generators, landing and recognition lights, relays, valves, motor generators, static inverters, actuators, brakes, and hydraulic pumps, and provides NDT evaluations with an on-site Level III Technician in Magnetic Particle and Liquid Penetrant inspections.

AOG serviceLiquid Penetrant Inspectionnon-destructive testingoverhaul and repair

Calico Coatings is an AS9100D certified, ISO 9001 certified, ITAR registered, and FFL licensed performance coatings company based in Denver, North Carolina. Founded in 1996 by Tracy Trotter, it operates as a joint venture with HEF North America and serves aerospace, defense, medical, motorsports, automotive, and other industries with proprietary CERTESS® coating technologies.

ceramic coatingDLC coatingdry film lubricationmanganese phosphate pretreatmentmicrofinishingPECVD coatingPVD coatingR&DsuperfinishingTeflon coatingtribology testing

Canton Drop Forge, Inc. is a closed die forging company based in Canton, Ohio, specializing in custom drop forgings for high-performance applications. It serves markets including aerospace, defense, power generation, oilfield, mining, transportation, and shipbuilding, and offers in-house die sinking, heat treatment, engineering and design, and inspection and testing.

annealingclosed-die forgingCNC millingdie sinkingdrop forgingfluorescent particle inspectionheat treatmentlaser scanning inspectionmetallurgical inspectionnormalizingsaw cuttingUltrasonic TestingVertical turning

Chardam Gear Company is a manufacturer of precision gears, housings, and gearbox assemblies for the aerospace and defense industries, with over 65 years of manufacturing experience. Located in Sterling Heights, Michigan, it produces highly processed parts requiring multiple machining and processing operations for aircraft systems and programs such as the Space Shuttle and Hubble Telescope repair.

BroachingCMM inspectionCNC machiningCNC millingCNC OD & ID grindingCNC turninggear grindingGear honinggear & spline cuttinghobbingmetallographic laboratoryshapingspiral bevel gear grindingsurface temper inspectionSwiss lathe turning

Coastal Aerospace, Inc. specializes in the repair, overhaul, and support of all GTCP 85 Series Auxiliary Power Units (APUs) for airborne and ground support. It is an FAA Certified Repair Station (No. F14R668Y) whose mission is to provide the highest quality repair, overhaul, and support of auxiliary power units and components in a prompt and cost effective manner.

APU overhaulAPU repairAPU starter motor dynamometer testingAPU supportAPU testingdynamic balancingfuel atomizer flow testingfuel component testinginspection and testing

DART Aerospace is a designer and manufacturer of helicopter mission equipment, parts and accessories, founded in 1975. It serves more than 120 countries and supports over 5,000 aircraft worldwide, with 2,000 STC-certified products and a global aftermarket support network. Its Global Centers of Excellence design, manufacture, install, test, inspect, repair and certify products across facilities in Canada, USA, Mexico and the UK.

arc weldingbird strike and functional testingcertificationcomposite structures repairdesigndrop testsfinite elements and computational fluid dynamics analysisflammability and structural testingflight testsfluorescent penetrant inspectionhydrostatic testinginspectioninstallationmanufacturingrepair and overhaulsheet metaltestingthermoformingwelding

Electron Plating III, Inc. is a Southern California metal finishing company specializing in precision plating and surface treatment for aerospace, defense, and industrial customers. It operates under a rigorous quality management system and is Nadcap accredited for Chemical Processing, Nondestructive Testing, and Aerospace Quality System, and ITAR registered. The facility offers 13 finishing processes under one roof.

anodizingcadmium platingchemical filmchemical processingcoatingsdry film lubricantelectroless nickel platinghydrogen embrittlement relief bakinginspectionLiquid Penetrant Inspectionmetal finishingpaintingpassivationTeflon impregnationtin platingzinc plating

Embee Processing, a Noble Aerospace Company, is a metal finishing facility in Santa Ana, California, with over 70 years in business. It operates a 124,000 sq. ft., 10-building campus offering complete start-to-finish production capabilities, taking parts from pre-plate grind through non-destructive testing, shot peening, plating, post-plate grind, paint and solid film lube operations. All parts are processed according to AS9100 and NADCAP requirements.

anodizingchemical conversion coatingfluorescent penetrant inspectiongrindingHVOFion vapor depositionnital etchnon-destructive testingpaintingpassivationplatingshot peening

Evergreen Tool Company is a family-owned and operated business founded in 1981 and located in Peshtigo, Wisconsin. It designs and manufactures entirely U.S.-made products including penetration seals, patented cutting tools, and automatic screw machine products, and also offers custom and contract machining. The original Quik-Seal was developed in response to NFPA requirements for commercial kitchens.

CNC machiningCNC turningcross-hole drillinglean manufacturingmillingmulti-spindle screw machiningnon-contact inspectionrobotic loadingSwiss turningtapping

Flowline Division - Ezeflow USA Inc., branded as Flowline Fittings, is a U.S. domestic manufacturer headquartered in New Castle, Pennsylvania, producing corrosion resistant pipe fittings and forgings since 1948. It is an approved Level 1 SubSafe supplier to the US Navy submarine and aircraft carrier industry and serves nuclear, defense, and commercial markets. The company is ISO 9001:2015 certified.

ASME Section IX weldingburst testingCNC machiningcold formingdye penetrant inspectionheat treatinghot formingnon-destructive testingUltrasonic TestingX-ray examination

Forest City Gear is a world-class manufacturer of fine and medium pitch custom gears, founded in 1955. The company produces gears for applications ranging from tractors to aircraft, exam tables to prosthetic limbs, and telescopes to the Mars Curiosity Rover, and handles both one-of-a-kind precision gears and high-volume production. It holds ISO-9001, AS9100, ISO 13485, and ITAR certifications.

carbide re-hobbingCNC gear hobbingCNC machininggear grindinggear inspectiongear shapinglaser markingthread grinding

Geotech Engineering and Testing (GET) is a Texas-owned, multi-disciplined organization of licensed engineers, geologists, field and laboratory technicians, and clerical personnel founded in 1985. GET has a staff of about 60 and has conducted geotechnical engineering services for more than 30,000 projects, serving Texas, Louisiana, New Mexico, and Oklahoma.

construction materials testingdrillingengineering analysis and reportingenvironmental site assessmentForensic engineeringlaboratory testingliquid penetrant testingsoil boringsUltrasonic Testingweld inspection

Gould-Bass Company, based in California since 1971, is a total concept company providing Non-Destructive Testing (NDT) equipment, parts and supplies. It designs, produces and installs Magne-Tech® magnetic particle inspection systems, penetrant inspection systems, and process control instrumentation, and offers in-house repair and calibration services.

calibrationdesignin-house repairsinstallationpenetrant inspectionproduction

Great Lakes Testing, Inc. (GLT) provides non-destructive testing for manufacturers, fabricators, and fire departments across Wisconsin and the Great Lakes region since 1993. Services include radiographic testing (traditional film and computed radiography), visual testing, certified weld inspection, magnetic particle testing, dye penetrant testing, ultrasonic testing, phased array ultrasonic testing, film digitization, and fire ladder and aerial testing.

certified weld inspectioncomputed radiographydye penetrant inspectionfilm digitizationfire ladder and aerial testingPhased Array Ultrasonic TestingradiographyUltrasonic Testingvisual testing

Hadd-Co Inspection Lab has provided non-destructive testing (NDT) services to customers across the U.S. for over 60 years. The lab inspects a wide variety of parts from fasteners to large tubing and serves the military, major aircraft manufacturers, their vendors and contractors, and commercial companies. It is Nadcap-accredited and offers rapid turnaround times.

air freight shippingLiquid Penetrant Inspectionlocal deliverynon-destructive testingoil protectionparts dyeingpassed test markingspecial packagingweekend expedited orders

H&N Electric, founded in 1979 and now part of The Timken Company, is a regional leader in electrical design and installation, electric motor and generator repair, outside field service and predictive maintenance services. Located in Pasco, Washington, it serves the Pacific Northwest and beyond from an 80,000 square foot facility, operating through Crane, Electric, and Wind service divisions for aerospace, manufacturing, municipalities, mining, agricultural, power generation, oil and gas, and other heavy industrial customers.

AWA Baker winding analysisbearing replacementborescopingCO2 dry ice cleaningdynamic balancingdynamometer load testingelectric motor repairgenerator repairinfrared thermographylaser alignmentmachiningmotor circuit evaluationpredictive maintenancerewindingseal replacementUL508 custom panel shopUltrasonic Testingvibration analysisVPI (vacuum pressure impregnation)