FPGA design

EM Photonics develops high performance computing and embedded systems solutions primarily for image processing, scientific computing, and linear algebra. The company uses GPUs, FPGAs, and other parallel computing platforms to accelerate complex computational applications, serving commercial, military, and defense clients. It offers GPU consulting, CPU-to-GPU code porting, CUDA training, and custom embedded device design.

C++ AMPcode optimizationCUDADSP-based systemsembedded systemsGPU computingimage processinglinear algebraOpenCLPCB designscientific computing

Eridan is a U.S.-based technology company redefining how wireless networks are built. Its compact radio architecture delivers the performance of traditional systems at a fraction of the power, size, and cost. Built for Open RAN and powered by its patented Ultra-Clean Signal™, Eridan makes it possible to expand connectivity into environments where legacy radios fall short: urban centers, rural communities, industrial sites, and national infrastructure.

5G Open RAN integrationfirmware developmentGaN designradio design

Etteplan is a technology service company that serves industrial companies globally. Its experts provide engineering, software and embedded systems, technical communication, testing, and green transition services to help customers make systems, processes, and products smarter, more efficient, and more sustainable. Etteplan has offices in Finland, Sweden, the Netherlands, Germany, Poland, Denmark and China, plus a sales office in the USA.

additive manufacturingantenna and RF designautomationDigital TwinElectrical Engineeringembedded software developmentEMC testingEnvironmental testinglife cycle assessmentMechanical EngineeringPCB layout & designplant engineeringprocess engineeringtechnical documentationtechnical translations and localization

FEI-Elcom Tech, Inc. was founded in 1995 as a design and manufacturing company specializing in DRO-based RF frequency sources. Today it builds high-performance ultra-wideband Electronic Warfare solutions including synthesizers, up/down converters, RF front ends, receivers, and phase locked oscillators for airborne, seaborne, and rugged terrestrial environments. Customers include the US DoD and prime contractors such as BAE, Northrop Grumman, Lockheed Martin, Boeing, Raytheon, and NAVAIR.

100% burn indigital designEmbedded SoftwareHALT/HASS testinghermetically sealed packagingHybrid Thin and Thick Film technologiesLabView ATE testing up to 40 GHzmechanical designMICMMICPCB designRF cable assemblyRF hardware designRF & MW module assemblyschematic layoutsystems softwarewire bonding

Fidus specializes in custom embedded systems design and electronic product development, delivering turnkey solutions from early concept and architecture through final system design and delivery. Its in-house North American engineering teams provide hardware design, embedded software, signal and power integrity, FPGA design, ASIC design and verification, and mechanical and thermal design for aerospace/defense, medical, communications, computing, and other markets.

ASIC designembedded software developmentFPGA prototypinghardware validationhigh-level synthesishigh-speed transceiver designIP core developmentmechanical and thermal designPCB layoutpower integritysignal integritysystem integrationUVM verification

Foresys is a full service electronic product development center specializing in complex circuit design, FPGA/ASIC development, software development and verification services. Located in Wexford, PA, the company offers turnkey FPGA design, PCB design, embedded design, design review, IP cores, and software development, serving as an extension of clients' engineering teams.

ASIC designdesign reviewembedded software developmentfloorplanninglab diagnosticsPCB layoutplace and routepower integrityRTL coding in Verilog, System Verilog, VHDLschematic capturesignal integrity analysissynthesisverification (OVM, UVM, VMM)

GIRD Systems, Inc. develops custom solutions in signal processing, communications, and electronic warfare. The company has over two decades of custom waveform development and provides solutions from design to implementation, including turn-key hardware and reusable firmware IP blocks for commercial and military markets.

algorithm designHardware-in-the-loop testingRF designsignal processingsimulationsoftware defined radio developmentuser interface developmentVHDL implementationwaveform design

Hardy Logic LLC is an engineering consultancy physically based in Denver, Colorado, offering accelerated engineering solutions with technical expertise in FPGAs/SOCs, automation, high performance, real-time, low power, and AI integration. The company serves defense, intelligence, aerospace, and commercial industries with diverse sensor experience. Owner/consultant Jeff Hardy offers 15+ years of design experience.

AI integrationautomationdesign analysisfirmware developmentFPGA implementationhardware design and debugHDL design and verificationsoftware tool creation

Inflextech delivers full-stack edge sensing technology for defense primes, autonomous-vehicle programs, and sensor integrators, including edge fusion hardware, a specialized design flow, and on-device AI inference within SWaP budgets. Founded by CEO Chandru Ramamurthy, the company focuses on energy efficiency, low latency, and customized sensing for physical intelligence, moving from research into production-ready edge sensing and decision-autonomy work.

application-specific designedge fusion hardwarelossless compressionon-device AI inferencequantizationsensor fusionsoftware-hardware co-design

Innovative Computer Technology (ICT) provides electrical/electronic engineering services, specializing in full turnkey project development: design, develop, fabricate, build and test systems or products. Since 1986 ICT has worked with clients on engineering projects, with staff experience in system architecture, analog and digital hardware design, FPGA design, embedded software, PCB layout and board fabrication.

analog hardware designboard fabricationdata acquisitiondigital hardware designEmbedded Softwaremanufacturing test systemsPCB layoutPCB testingSPICE simulationSystem architecture

iWave provides product design and engineering services with ARM & SoC-FPGA SOMs, SBCs, and ODM solutions tailored for embedded systems. The company offers FPGA system on modules, RF boards and solutions, PCIe and accelerator cards, 3U VPX systems, FMC/XMC modules, MIL and space grade modules, and ARM system on modules, plus custom design and manufacturing services. Since 1999, iWave has delivered embedded computing solutions with expertise in FPGA design, embedded systems, high-speed hardware, RTL development, and thermal and mechanical engineering.

1U & 2U 19-inch rackmount designscustom 3D printed enclosurescustom carrier board designcustom FPGA designcustom RF board designcustom SoM designcustom system designembedded systemshigh-speed hardwaremechanical and thermal designODM manufacturingproduct certification and qualificationproduct lifecycle managementRTL developmentrugged 3U & 6U VPX designstesting jigs and fixturesthermal and mechanical engineering

IXI Technology is a COTS manufacturer and OEM that has provided Naval Tactical Data Systems (NTDS) I/O protocol technology since 1984. It designs and manufactures electronics, software, and firmware for data translation from RF, SYNCHROS, VIDEO, NTDS, STANAG, RS-232, RS-422, COAX, TRIAX and other protocols into Ethernet or Fiber, serving military and defense customers and prime OEMs with backward-compatible solutions that extend the life of legacy defense technology.

automatic test stationscable designCyber securityelectronic designencryptionmanufacturing assembly and testmechanical designprinted circuit board designsoftware developmentvirtualization

Kaltan Circuit Innovations (KCI) is an engineering consulting firm offering concept to manufacturing solutions for custom electronics, from simple two-layer designs to over ten-layer multi-board solutions and from single sensor interfaces to neural network driven sensing algorithms. KCI has experience in military electronics, airborne electronics, low-power sensing systems, and engine controls.

algorithm developmentcircuit analysis and simulationintegration and testingPCB designpersonnel trainingtechnical documentationtransition to manufacturingvalidation