Conformal coating

AA Technology Inc. is a contract manufacturer founded in 1994 that provides a one stop solution for PCBAs, harness and box assemblies with automatic SMT and through-hole capabilities. It operates a 38,500 sq./ft. facility in Ronkonkoma, NY, and is ISO 9001/2015 certified by NQA-USA and AS9100:2016 registered.

3D X-rayAOI inspectionBox buildcleaningelectrical testingflying probe testingrapid prototypingReverse Engineeringselective solderingSMT assemblythrough-hole assemblywave soldering

Absolute EMS is a Silicon Valley-based provider of high-technology electronics manufacturing services (EMS), founded in 1996. The company owns its land and a 20,000 square foot facility, operating a state-of-the-art 4.0 factory. It serves Medical, Military, Industrial, Networking, and Engineering markets, offering quick-turn prototypes, volume assembly, and miniaturization, scaling from proto lots of 5 units to 100k units. Certified to ISO 13485:2016, AS9100D, and ISO 9001:2015.

connector press-fittingengineering and new product introductioninline cleaningminiaturizationPCB assemblyquick turn prototypessupply chain solutionsSystem Integrationtest and inspectionvolume assembly

ABSOPULSE Electronics Ltd is an original equipment manufacturer (OEM) of heavy-duty, industrial quality switch-mode power conversion products, founded in 1982. All products are designed and manufactured in an 83,000-square-foot custom-built facility in Ottawa, Canada. The company is primarily a custom power supply design house and deals directly with OEMs, electrical utilities, municipalities, consulting engineers and distributors worldwide.

BABT approved facilityburn-in testingconduction coolingcustom power supply designfull encapsulation (potting)in-house CSA/UL certificationin-house manufacturing

ABX Engineering, Inc. is a contract electronics manufacturer located in Burlingame, California, with over 55,000 square feet of manufacturing area in two buildings. It provides full turnkey electronics manufacturing services, printed circuit board assembly, and electromechanical and box-build contract manufacturing for industries including medical, aerospace, defense, transportation, broadcast, telecom, and industrial.

AOI automatic optical inspectionBGABOM scrubbingBox buildDFMencapsulation/pottingflex and rigid flex assemblyflying probe testfunctional testICTmaterials managementselective wave solderSMT surface mount assemblythrough-hole assemblyX-ray inspection

Accelerated Assemblies is an Illinois-based provider of PCB assembly and manufacturing services, serving customers across the USA. The company specializes in low-to-mid volume PCB production and prototyping, offering turnkey and consignment assembly, quick turn assemblies, and end-to-end services including engineering and design support.

automated optical inspectionBGA and Micro BGA placementbox buildsfunctional testingin-circuit testinglow pressure moldingpottingSMT assemblythrough-hole assemblywire harness assemblyX-ray inspection

Accusemble Electronics is a contract manufacturer specializing in precision circuit board assembly, with over 45 years of industry experience. It serves commercial and defense industries, offering custom circuit board assembly, engineering prototype and NPI services, low-to-high volume production, rework and repair, and full engineering support. The company emphasizes quality, value, and service with Class 1, 2, and 3 manufacturing, specializing in Class 3.

AOI inspectionClass 1, 2 & 3 circuit card assemblycomponent removal and replacementDesign for Testdrag solderinghybrid heating reworkIPC-7711/7721 reworkmixed technologyprototype design for manufactureSMT assemblysurface mount technologythru-hole assemblyX-ray inspection

Acorn Assembly is a US-based full-service EMS provider specializing in fast, high-quality printed circuit board assembly. Founded in 1985, the Franksville, Wisconsin facility handles prototypes through full-scale production, with SMT lines, thru-hole capabilities, testing, potting, coating, final assembly, and box build services. The company is ISO 9001:2015 certified, ITAR registered, UL registered, an IPC member, and RoHS-compliant.

automated axial insertionAutomated Optical Inspection (AOI)Box buildcable harness assemblydepanelingflying probe testingfunctional circuit test (FCT)hand solderingin-circuit test (ICT)pottingselective solderingSMT assemblytape and reelthrough-hole assemblywave solderingX-ray inspection

Advanced Coating is a contract provider of Parylene conformal coating services for military, aerospace, defense, medical device, high-risk electronics, and industrial applications. Founded in 1987, the company operates from a 12,000-square-foot facility in Rancho Cucamonga, California, and is certified to ISO 9001 and AS9100D, with ITAR compliance. It offers Parylene N, C, D and HT coatings, precision masking and demasking, plasma treatment, controlled bake processes, inspection, engineering support, and underfill.

controlled bake processesESD protectioninspectionParylene chemical vapor depositionplasma treatmentprecision masking and demaskingunderfill

AMTI Advanced Manufacturing Services is a global provider of electronics manufacturing offering rapid prototyping, NPI to mid-volume production, and logistics and support. The company is ISO 9001:2015 registered, has adopted AS9100 requirements, is IPC site certified, and provides RoHS support. It serves markets including military, defense and homeland security, telecom and wireless, energy, and commercial/consumer products.

aqueous board cleaningAutomated Optical Inspection (AOI)BGA/Micro BGA placementcable and wire harness assemblyflip chip placementfunctional testingin-house design engineeringpottingrapid prototypingReflow solderingSMT assemblysolder paste inspection (SPI)through-hole assemblywave solderingX-ray inspection

Agility Mfg, Inc. is a contract manufacturing company specializing in printed circuit board assembly, quick turn prototype services, and direct fulfillment. Founded in 1987 and based in Dover, NH, it assembles projects to customer specifications and IPC-610 assembly guidelines, and has completed ISO 9001:2015 certification for contract manufacturing of complex, high-mix electronic assemblies and services.

BGA, Micro BGA and QFN placement and reworkbox buildscable/wire solderingdevice programmingECO reworkelectrical wiringelectro-mechanical assemblyfunctional testingmechanical assemblymixed technology assemblyPCB assemblypress fit/swageSMT placement down to 01005 package sizesurface-mount assemblythru-hole assemblytrace and pad repair

Agility Technical Solutions LLC provides technology, engineering, and manufacturing solutions to the defense and commercial sectors. It is AS9100 certified with IPC certified personnel, offering obsolescence solutions through reverse engineering and redesign of obsolete electronics cards and end-of-life power supplies, small prototype through low-rate production manufacturing, and business-to-business and business-to-government integration and consulting services.

consultingintegration serviceslow-rate productionmanufacturingPCBA productionPTHRedesignReverse EngineeringSMTtesting

Alternative Manufacturing Inc (AMI) is an employee-owned electronics manufacturing services (EMS) company based in Winthrop, Maine. With over 30 years of experience, AMI provides full-service PCB assembly and system-level box build, serving startups and mature builds from prototypes to volume production. The company emphasizes lean manufacturing, Yankee ingenuity, and long-term customer partnerships.

AOI inspectionBox buildcable and harness assemblyDFMenvironmental testingfunctional testinglean manufacturingNPI supportPCB assemblySMT placementsoftware loadingsupply chain managementthru-hole assemblyultrasonic weldingX-ray inspection

A and M Electronics, Inc. is a contract manufacturing facility serving the military, commercial and medical electronics industry since 1977. Located in Valencia, CA, it specializes in circuit board assembly (SMT and through hole), cabling, harnessing, box build and other electronic products. The company holds certifications including ISO 9001:2015, AS9100D, NADCAP, ITAR, and IPC/ANSI J-STD-001.

automatic optical inspectionBGABox buildburn-in testingcable assemblyde-ionized aqueous cleaningEngineering and designhand solderingmicro BGASMT assemblythrough-hole assemblywire harnessingX-ray inspection

AI Technology, Inc. (AIT), founded in 1981 and commencing manufacturing operations in 1985, is a provider of advanced electronic packaging adhesives and material solutions. AIT is headquartered on a 16-acre manufacturing and R&D campus in Princeton Junction, New Jersey, and in 2022 added a second company-owned 18-acre campus in Princeton, NJ. AIT manufactures products to ISO 9001:2015 standards and has maintained this accreditation since 1999.

adhesive film and paste manufacturingclean room manufacturingcustom adhesive design and manufacturingEMI/RFI shieldingISO 9001:2015 certified manufacturingR&D

American Aerospace Controls (AAC) is a New York-based, AS9100D and ISO 9001:2015 certified designer and manufacturer of standard and custom AC and DC current, voltage, power and frequency transducers, shunts and pressure sensors for high-reliability aerospace, defense, rail, power and industrial applications. Established in 1965, it is a privately-held, 100% woman-owned small business that designs, manufactures, assembles and tests all products in the USA.

custom sensor designencapsulation/pottingenvironmental and performance testingin-house testingmagnetics winding (bobbin and toroid)manufacturingPCB fabricationsurface-mount and thru-hole soldering

American Circuits is an electronic contract manufacturer specializing in turnkey PCB services from design to box builds, located in Charlotte, North Carolina, where it maintains two manufacturing facilities totaling 40,000 sq ft. The company is ISO 9001 certified, ITAR registered, and U/L recognized, and does everything in-house from planning and design to final delivery.

automated optical inspectioncable assemblyelectro-mechanical assemblykittingmachiningmixed technology assemblyPCB assemblyPCB DesignpottingReverse EngineeringSMT assemblytestingthrough-hole assemblywire harness assemblywire processing (straightening, cutting, stripping, crimping, terminating)

ACDi (American Computer Development, Inc.) is a U.S.-based electronics manufacturer and PCB design company founded in 1984. It provides end-to-end electronics manufacturing services including PCB design and layout, PCB assembly, box builds, cables and harnesses, testing, and product lifecycle management, serving aerospace, defense, medical, industrial and commercial customers.

AOI inspectionautomated cable productionbonding and stakingbox buildscable and harness assemblychassis assemblyDFM feedbackfiber optic harnessinghand solderingnew product introductionPCB design and layoutpottingpress-fitprototypingrobotic solderingselective solderingSMT assemblythrough-hole assemblyX-ray inspection

Antaira Technologies is a developer and manufacturer of industrial networking solutions, designing and manufacturing industrial networking products with a core intent on improving connectivity in extreme environments. Since 2005, the company has designed and manufactured industrial switches with network redundancy for rugged, mission-critical applications.

designmanufacturing

Apex Embedded Systems LLC specializes in COTS PC/104 analog and digital I/O modules and provides hardware and software engineering services to build new IoT platforms and refresh obsolete systems. The company serves industrial, scientific, research, military and aerospace customers with rugged, long-life embedded systems and 22+ years proven reliability.

custom firmware developmentdrop-in replacementmulti-card mergerapid prototypingstandard product modificationssustaining engineeringtin mitigation

Applied Automation and Controls, Inc. (AAAC) is an ISO 9001:2015 certified, Texas-licensed engineering firm (PE License #0003462) with over 25 years of experience specializing in automation and control systems for oil & gas. AAAC designs, manufactures, and supports mission-critical instrumentation, data acquisition, SCADA, FPGA-based systems, and custom embedded solutions for harsh oilfield environments.

box buildscable harness assemblyEmbedded firmware developmentenvironmental testingFPGA designHALT testingHASS testinghazardous area (ATEX) designIoT integrationPCB assembly (through-hole, SMT, mixed technology)SCADA and HMI developmentSystem Integrationwireless telemetry

Astro-Geo-Marine, Inc. (A.G.M.) is a contract and custom design manufacturer of electronic power supplies, inverters, printed circuit board assemblies, controllers, regulators, amplifiers, tone generators, filter assemblies, solenoids, relay assemblies, load banks, battery analyzers and conditioners, and cable and harness assemblies. Founded in 1964 by Joseph Fenole, A.G.M. serves aerospace (military and commercial) and industrial sectors and is AS9100 Rev D certified with J-STD-001 and IPC-A-610 (class 3) certified operators.

cablingcleaningcontract manufacturingcustom designharnessinginsulation testingLead formingmarkingmechanical assemblypottingRedesignrepairReverse EngineeringSwagingTemperature Cyclingtestingtinningvibrationwiring

Ateez is an ISO 9001:2015 certified manufacturer that designs, manufactures, and tests advanced military and defense components. The company offers full-service capabilities spanning component design and engineering, precision manufacturing and assembly, and testing and validation, serving defense and aerospace organizations with mission-critical products.

component design & engineeringdielectric withstand (hi-pot) testingencapsulation/over-mold/pottingenvironmental temperature testinginsulation resistance checksPCB assembly (SMT & through-hole)precision manufacturing & assemblypressure integrity teststesting & validation

Avcom SMT, Inc. is an ISO 9001:2015 certified, family owned and operated circuit board manufacturer based in Westerville/Columbus, Ohio, established in 1970. The company specializes in custom PCB assembly with quick turn, low to mid volume, high-mix prototyping assemblies, and offers a full range of electronic manufacturing services.

3d PrintingAutomated Optical Inspection (AOI)BGA assemblydepanelizingfunctional testingmixed technology assemblyPCB prototypingReflow solderingselective solderingsurface mount technology assemblythrough-hole assemblywave solderingX-ray inspection

AVEOX designs and manufactures advanced Brushless DC (BLDC) motors, motion controllers, and power conversion electronics for mission-critical applications in the Military, Aerospace, and Industrial sectors. Founded in 1992, the company operates a 20,000 sq. ft. vertically integrated facility in Simi Valley, California, with in-house design, manufacturing, and testing capabilities. AVEOX is ITAR registered and AS9100 Rev D and IPC J-STD-001 certified.

4th axis machiningC-axis millingCNC millingCNC turningcomposite wrappingComputational Fluid Dynamics (CFD)controller testingelectronic balancingelectronics assemblyencoder and resolver calibrationFinite Element Analysis (FEA)magnet bondingmotor testingmulti-spindle machiningprecision machiningrotor and stator manufacturingrotor sleevingvacuum pressure impregnation (VPI)winding and coil insertion