building information modeling

Accelerated Construction and Metal LLC is a Turlock, California-based construction and steel fabrication company established in 2013. It provides steel design and fabrication, field construction, structural concrete foundations, and structural/miscellaneous steel installation. The company holds California contractor licenses A, B, C13, C51 and HAZ, has an A rating with ISNetworld, and is Gold Shovel certified. It reports over 400 projects completed.

AutoCADconcrete placementdesign and detailingfabricationmillwright servicesoptical alignmentspipe fittingriggingSolidworksstructural steel erectionTeklavalue engineeringwelding

ACR Engineering, Inc. is an engineering firm founded in 1980 that applies re-engineering principles to make buildings and systems more energy efficient and less costly to operate. The firm develops its own projects rather than working through architects, remaining directly accountable to clients from concept through construction and commissioning. It specializes in energy management, HVAC/MEP design, commissioning and recommissioning, and energy saving performance contracting.

commissioningComputational Fluid Dynamics Modelingcontrol system designenergy analysisenergy auditsHVAC and MEP designLEED certification supportrecommissioning

Alpha Mechanical, Inc. is a regional mechanical and plumbing specialty contractor based in El Cajon, California, serving Southern California since 1991. The company provides HVAC, plumbing, and process piping services spanning design and fabrication to new construction and installation, and was one of the first regional specialty contractors to embrace design-build delivery.

air and water balancingclean room fabricationdesign-buildfabricationHVAC installationhydronic piping prefabricationmedical gas installationorbital weldingplumbingprocess pipingsheet metal fabrication

BAM Consulting Engineers is an independent, full-service engineering consulting firm that has provided structural engineering, shop drawing and Building Information Modeling services to the AEC community since 2001. It specializes in design, analysis and modeling, and leverages the Revit model to produce shop drawings and support scheduling, estimating and clash detection.

AutoCAD draftingclash detectionConstruction DocumentationestimatingRevit modelingschedulingshop drawingsstructural engineering

BIM Solutions Building Information Modeling (BIM) is transforming the way we design, construct, and manage buildings and infrastructure. Our advanced BIM solutions empower architects, engineers, and contractors with intelligent 3D models, real-time collaboration, and data-driven decision-making—enhancing efficiency and accuracy at every stage of a project. Capability Statement Our Services 3D Point Cloud Scanning Services for AEC industry As-built documentation Quality control & verification Progress monitoring Contact Us Interested in working together? Fill out some info and we will be in touch shortly. We can’t wait to hear from you!

3D point cloud scanningas-built documentationclash detection and coordinationfacility and asset managementlaser scanningprogress monitoringquality control and verification

BISH Enterprises, LLC is a consulting firm that consults with clients to implement customized solutions based on needs analysis from onsite consultation. It provides consulting services across AEC, construction, and mechanical disciplines, including workflow automation, programming, Building Information Modeling, content creation, software implementations, support and training, 4D simulations, quantity takeoffs, 3D parametric modeling, design and drafting, and building coordination.

3D parametric modeling4D simulationsAutoCAD APIAutoCAD Map APIAutodesk 3ds Max renderingsbuilding coordinationCADconsultingcontent creationcoordination reviewdesign and draftingOracle Db automationprogrammingquantity takeoffsRevit API automationsoftware implementationssupport and trainingvirtual design and constructionworkflow automation

Blair Remy Architects delivers innovative architectural solutions through design, planning, and project management. The firm has expertise in architecture, interior design, civil engineering, and project management, and is committed to design excellence, customer satisfaction, and responsiveness to complex schedules and budgets. It uses advanced software such as AutoCAD and Revit for building information modeling.

architectureAutoCADcivil engineeringInterior Designproject managementRevitsketching

Bridgers & Paxton Consulting Engineers, Inc. is an engineering firm offering mechanical, electrical, plumbing, instrumentation & controls engineering, building information modeling, technology consulting, and energy & sustainability services. The firm states it is a Federal Small Business with Large Business Experience and has completed 3,300+ healthcare projects. It signed the MEP 2040 Challenge to achieve net zero operational carbon by 2030 and embodied carbon by 2040.

Battery Storage SystemsBuilding Automation Systems designcombined heat and powerElectrical Engineeringenergy & sustainabilityfire alarm systemsgeothermal systemsGround Source Heat Pump Systemsinstrumentation & controls engineeringlighting designMechanical EngineeringMicrogrid designPlumbing Engineeringsolar designtechnology consultingThermal Energy Storage Systems

BWE is an employee-owned firm that has provided structural engineering, civil engineering, and land surveying services on construction projects throughout San Diego, the Southwest, and beyond since 1971. The firm has completed over 14,000 projects and uses Autodesk Revit and AutoCAD Civil 3D for Building Information Modeling.

3D laser scanningcivil engineeringconstruction stakingdesign-buildexpert witnessland surveyingstructural engineeringSustainable Design

Caddell Construction is a customer-focused general contractor with expertise in commercial, governmental and international markets. It has completed projects totaling more than $24+ billion throughout the U.S. and in 38 countries on five continents, and is headquartered in Montgomery, Alabama.

Construction Manager At-Riskdesign/buildgeneral contractingPreconstruction

Civiltech Engineering, Inc. is a transportation and civil engineering firm focused on transportation engineering. The firm provides planning, design, and construction solutions and is prequalified by IDOT in a majority of categories. It has office locations in Itasca, Chicago, and Milwaukee.

3D project deliverablesconstruction engineeringDesign & EngineeringPlanningtransportation engineering

Corbara Building Group Corp. is a full-service Construction Management firm and Licensed General Contractor that started in 2009, providing Quality Control and Safety services to General Contractors and A/E Firms working for the Federal government. It serves Federal, agency, and private sector clients with services from architectural design, site evaluation, and conceptual design budgets through project administration, general construction, and final project closeout.

architectural designbidding assistanceconceptual design budgetingconcrete workconstruction managementdrywallframinggeneral contractingLean constructionproject administrationquality controlsafety servicesself-perform demolitionsite evaluationunderground utilities

Custom Engineering is a consulting engineering firm founded in 1974 that designs mechanical, plumbing, and electrical systems for new construction and rehabilitation of commercial, industrial, and institutional facilities. The firm is licensed in 39 states plus the District of Columbia and produces energy-efficient, LEED-certified designs. It has offices in Independence and St. Louis, Missouri, and Overland Park, Kansas.

commissioningElectrical DesignHVAC designlighting designlow voltage systemsMechanical/Plumbing designRetro-CommissioningSustainable/LEED-certified design

Scorpio is a full-service commercial construction firm based in Gainesville, Florida, with additional offices in Jacksonville, Maitland, Tallahassee, and Ocala. The company describes its approach as community-centered construction and builds projects including healthcare, education, public safety, and animal services facilities.

commercial general contractingCompetitive Hard-Bid Procurementconstruction management at-riskcost managementdesign-buildJobsite SafetyProject Administration & Data ManagementQuality ManagementSchedule ManagementSubcontractor Procurement & ManagementSustainable Construction Practices

Managing Expectations Through Cost PlanningEstablishing A Number Today That Meets Expectations TomorrowConstruction Cost Planning And Management Principals of Directional Logic JENNY YOUNG With a background in quantity surveying as well as over 25 years experience in the A/E and construction industry, Jenny provides cost planning and management services on a wide range of project types, from seismic retrofit to modernization work and new construction projects throughout the United States and overseas. Jenny is the managing principal responsible for management of the organization and presiding over day-to-day operations of Directional Logic. MARTIN GORDON Martin brings to the table a 45-year building profession career. He has extensive experience working with internationally renowned architects on a variety of building types. He is a motivator and communicator as well as a proactive team.

benchmarkingCost Estimatingcost managementCost Modelingcost planningfeasibility study cost analysisvalue engineering

Dunn Associates, Inc. is a consulting structural engineering firm based in Salt Lake City, Utah, with licenses to provide structural design services in over 40 states. The firm is committed to technical excellence and minimizing construction cost for clients through close coordination and evaluation of cost design concepts. It was founded in 1995 and has offices in Salt Lake City and St. George, Utah.

Adaptive ReuseATFP solutionsbase isolation designCAD draftingLEED-accredited designprogressive collapse designseismic designstructural engineeringvibration control

Dynalectric Company (Colorado), a subsidiary of EMCOR Group, is an electrical contractor that has served Colorado since 1951. It provides single-source solutions including electrical construction engineering, design/build services, preconstruction, consulting, project planning, custom fabrication, and facilities maintenance for commercial, industrial, and highway electrical work.

building automationconsultingcustom fabricationdesign/buildelectrical constructionfacilities maintenancepower distributionPreconstructionprefabricationproject planning

E Light Electric is a Colorado-owned and operated electrical contractor founded in Colorado in 1998, headquartered in Englewood, CO, with an additional office in Colorado Springs. It provides high-quality electrical and renewable energy installations and services projects and job sites nationwide.

cable termination 4kv to 69kvconstructiondesign-assist and design-buildelectrical contractingmaintenance and emergency serviceoverhead and underground distributionPreconstructionprefabricationsolar installationstorm restorationsubstation constructionutility services

EMCOR Group, Inc. (NYSE: EME) is a Fortune 500 company and member of the S&P 500 that provides mechanical and electrical construction, industrial and energy infrastructure, and building services. Its companies serve commercial and public sector clients across sectors, building, powering, servicing, and protecting facility systems from electrical and lighting infrastructure to mechanical and HVAC equipment, security, and fire protection.

24/7/365 emergency servicecommissioningdesign-buildelectrical constructionfacilities servicesfire protectionHVAClow voltage servicesmechanical constructionpiping and sheet metal fabricationplumbingprefabrication

Engineering Services Group, Inc. (ESG) is an independent professional engineering corporation located in Knoxville, Tennessee. It is a Mechanical/Electrical consulting engineering firm serving primarily East Tennessee and Western North Carolina, established in 1989. ESG designs 250 plus projects each year across educational, office, healthcare, government, military, religious, housing, sustainable design, commercial and industrial sectors.

construction project managementElectrical DesignElectrical Engineeringfire protection designHVAC designMechanical Engineeringplumbing design

Ennis Electric is an employee-owned electrical contractor serving the Washington, DC metropolitan area since 1974. Its core markets include commercial, institutional and industrial construction, with special emphasis on the government sector. The company provides electrical construction, preconstruction and design-build/design-assist services, and ranks among the largest electrical contractors in the DC region with more than 200 employees.

design assistdesign-buildelectrical constructionlighting and controlslow voltage systemsPower distribution and generationPreconstructionrenewable powerVDC coordination

Ensight Haynes Whaley is a structural engineering firm based in Houston, TX, with an office in Austin, TX, serving public and private clients since 2009. The firm offers full-service structural design as well as building forensics, with dedicated principal involvement on every project. It is registered as a Texas Certified HUB, Texas and Federal SBA, City of Austin MBE, and Hire Houston First, serving owners, architects and developers in education, healthcare, corporate, retail, and industrial sectors.

Autodesk Revit designbuilding forensicsconsultingproject managementStructural Designstructural engineering

ESI Electrical Contractors Serving Ohio and the Surrounding Region since 1966 View Our Services Construction Service Department Low Voltage Innovation Center Learn More IBEW NECA Electrical Training Center EV Charging Stations Commercial Forge Biologics Health Care VEGA Americas Commercial Megalodon Commercial, Industrial WPAFB Research & Development Project Government WPAFB 2MW Generator Installation Government Wright-Patterson Air Force Base Medical Center Renovation Government Wright-Patterson Air Force Base Human Performance Wing Government University of Dayton Arena Higher Education University of Cincinnati Substation Higher Education University of Cincinnati Nippert Stadium Renovation Higher Education, Historical Queen City Tower Commercial We are UL listed ESI’s Innovation Center fabricates everything from switch plates to entire electrical rooms. We offer 65 UL listed.

3D coordinationdesign assistelectrical constructionestimatingEV charging station installationlow-voltage installationmaintenance and repairPreconstructionprefabrication

FCI Constructors, Inc. is an employee-owned corporation specializing in construction management, general contracting, and construction-related services. Founded in 1978 in Grand Junction, Colorado, it is a full-service, multi-state general contractor serving the Rocky Mountain region and southwestern United States, completing commercial and light industrial projects for public and private sectors.

construction managementConstruction Manager At-Riskdesign-buildgeneral contractingremodel and renovationself-perform worksustainable buildingvalue engineering